Licensed & Insured, in McAllen and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in McAllen
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (956) 348-0421 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in McAllen and surrounding areas · On-site visits included · Free estimate within 24h
McAllen Metal Roofing is a team of local certified professionals based in McAllen. We respond quickly in McAllen and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (956) 348-0421⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews
“Our citrus packing shed out by the orchard had rust holes everywhere and we were losing time every time it rained. The crew came out and put on new corrugated panels over the whole warehouse roof in about three days. No more leaks, and the fruit stays dry.”
Commercial & Agricultural Metal Roofing
“We wanted that Mediterranean look for the front entry without tearing off the old shingles, and these guys pulled it off with a retrofit over the existing roof. Finish looks sharp and they cleaned up so well you couldn't tell anyone had been working there.”
Metal Roof Over Shingles (Retrofit)
“Had them build out the metal roof on our new equipment hangar and honestly the panel alignment is cleaner than I expected for a farm building. Straight lines, tight fasteners, done ahead of schedule.”
Commercial & Agricultural Metal Roofing
“Got three quotes for a standing seam roof on our house and these guys weren't the cheapest but they were the only ones who actually walked the roof and explained the flashing details. Two months in and it's held up through every storm.”
Standing Seam Metal Roofing
“Water was coming in right where a post meets the roof and I couldn't figure out why. They found the failed seal around the penetration, redid the flashing, and charged me way less than I was bracing for. Relieved is an understatement.”
Metal Roof Leak Repair
“The European-style metal shingle roof they installed on our house looks incredible, neighbors keep asking who did it. Crew of four finished in under a week and swept the yard for nails every single day.”
Metal Shingle Roofing
“Full replacement on our house after the old roof started failing. Quality of the work is solid, though they showed up a day later than promised. Once they started, though, they moved fast and the new roof looks great.”
Metal Roof Replacement
“We wanted the terracotta tile look without the weight and cracking, so they put on stone-coated steel panels. From the street you can't tell it isn't real tile. Only gripe is the estimate took a few days longer than I'd like, but the install itself was flawless.”
Stone-Coated Steel RoofingReal photos of our work in McAllen · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes panels, underlayment and standard flashing; price rises with pitch and tear-off. |
| Standing seam installation | Starting at $14/sq ft | Concealed fasteners, premium underlayment and custom flashing; complexity and panel gauge move cost. |
| Stone-coated steel or metal shingle installation | Starting at $13/sq ft | Textured or stamped systems with underlayment; roof shape and HOA profile rules affect pricing. |
| Complex or large-scale job | On estimate | Steep multi-story roofs, multiple valleys or deck repair need an on-site look before quoting. |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation (simple gable) | Starting at $10/sq ft | Includes panels, underlayment, concealed clips, and standard flashing on an accessible single-story roof. |
| Standing seam replacement with tear-off | Starting at $13/sq ft | Adds tear-off, disposal, and deck inspection, and the price rises with deck repair and layer count. |
| Standing seam over existing shingles | Starting at $11/sq ft | Retrofit with battens over one sound shingle layer, subject to code limits and deck condition. |
| Complex or large-scale job | On estimate | Multiple valleys, steep pitch, chimney and skylight flashing, or HOA design review need an on-site look first. |
| Travel | Included | In McAllen and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and new panels; pitch and penetrations move the price. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams; roof complexity and panel gauge drive the number. |
| Stone-coated steel or metal shingle replacement | Starting at $12/sq ft | Includes tear-off and profile matching; historic or HOA design review can add time and cost. |
| Decking repair and replacement | On estimate | Priced per sheet after tear-off reveals rot or hail damage; needs an on-site look. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit (corrugated or ribbed) | Starting at $7/sq ft | Includes deck inspection, underlayment, battens, panels, and standard trim on a single-layer roof. |
| Standing seam retrofit | Starting at $10/sq ft | Concealed fasteners, higher wind rating, and cleaner profile; price rises with roof pitch and complexity. |
| Stone-coated steel retrofit | Starting at $11/sq ft | Textured tile-look panels with hail resistance; color and profile choices affect the final number. |
| Deck repair or sheathing replacement | Quoted per section | Only if the inspection finds soft or rotted decking under the old shingles; we price it before we start. |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair and reseal | Starting at $450 | Resealing seams, pipe boots, and small penetrations, with UV-rated sealant included. |
| Panel and fastener repair | Starting at $750 | Replacing lifted or torn panels and installing new screws with sealing washers. |
| Flashing and leak repair | Starting at $650 | Rebuilding chimney, skylight, or wall flashing, plus water test to confirm the fix. |
| Storm and hail damage repair | On estimate | Scope depends on number of panels hit, roof height, and access, so we inspect first. |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, small seam) | Starting at $450 | Includes diagnostic walk, water test, and repair of failed fasteners or a small seam. |
| Flashing repair (chimney, skylight, pipe boot) | Starting at $650 | Covers removal and rebuild of flashing at one penetration, with new sealant and counter-flashing. |
| Multi-leak or widespread fastener failure | Starting at $1,200 | Priced by roof size and number of failed fasteners, often a full-plane re-fastening job. |
| Storm damage panel replacement | On estimate | Needs an on-site look to confirm panel match, extent of damage, and insurance documentation. |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers failed fasteners and new washers on a smaller roof or isolated leak area. |
| Full roof re-fastening | Starting at $1,450 | Walks the whole roof, replaces every compromised fastener, and reseals laps. |
| Oversized screw upgrade | Starting at $1,850 | For wallowed purlin holes where original fasteners no longer hold under thermal cycling. |
| Panel re-anchor and lap seal | On estimate | Needs an on-site look to count lifted panels and confirm purlin condition. |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel install (standard) | Starting at $5.50/sq ft | Standard corrugated panels, fasteners, and basic closures included; pitch and access move the price. |
| R-panel or 5V install | Starting at $6.25/sq ft | Deeper rib profiles and hurricane-rated screw patterns included; panel gauge and color affect cost. |
| Repair and re-fastening | Starting at $450 | Failed screw and washer replacement, closure resealing, and panel patching included; extent of damage drives price. |
| Complex or large agricultural job | On estimate | Packing sheds, barns, and multi-building farm sites need an on-site look before we quote. |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard profile | Starting at $9/sq ft | Includes underlayment, standard flashing, and basic architectural or shake profile; roof pitch and access move the price. |
| Slate or shake profile upgrade | Starting at $11/sq ft | Premium stamped profiles for historic or HOA homes; complexity of valleys, dormers, and chimneys raises the rate. |
| Tear-off and deck repair | On estimate | Needs an on-site look because layer count, sheathing condition, and disposal access vary house to house. |
| Recover over existing shingles | On estimate | Priced after we confirm code allows the existing layer count and the deck is sound. |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation (standard profile) | Starting at $9/sq ft | Includes underlayment, standard flashing, and panels on a typical single-story roof. |
| Spanish tile profile installation | Starting at $12/sq ft | Premium tile-look panels with more complex layout and trim work on cut-up roofs. |
| Tear-off and full replacement | On estimate | Scope depends on existing layer count, deck condition, and access around chimneys. |
| Retrofit over existing shingles | On estimate | Requires confirming a single sound layer and local code allowance before pricing. |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay, entry) | Starting at $20/sq ft | Includes shop-formed copper panels and soldered flashing; height and access raise the rate. |
| Zinc or architectural aluminum accent roof | Starting at $18/sq ft | Premium metal at lower material cost; roof complexity and flashing scope move the price. |
| Full architectural copper or zinc roof | On estimate | Full-roof specialty metal needs an on-site measure and fabrication plan before pricing. |
| Custom fabrication (cupola, finial, chimney pan) | On estimate | Hand-built trim and soldered pans are priced by the detail, not the square foot. |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story | Starting at $2.50/sq ft | Includes wash, prep, primer, and two coats on sound panels with light chalking. |
| Elastomeric coating system | Starting at $3.25/sq ft | Thicker film bridges micro-cracks on older corrugated and ribbed panels. |
| Rust treatment and restoration | Starting at $3.75/sq ft | Rust converter, spot priming, and finish coats where corrosion is present at fasteners. |
| Two-story or steep pitch | On estimate | Labor and fall protection costs rise with height, pitch, and limited access around palms. |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration re-flash | Starting at $600 | Covers one vent, pipe boot or skylight curb with new bent metal and sealant |
| Chimney counterflashing rebuild | Starting at $950 | Includes new counterflashing, chase inspection and sealing at the masonry joint |
| Multiple penetrations or valley repair | Starting at $1,400 | Price moves with the number of penetrations and roof pitch or height access |
| Rot or decking repair behind flashing | On estimate | Needs an on-site look because the extent of hidden damage varies widely |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Entry and porch guard run | Starting at $1,200 | Covers a short run of low-profile guards over one entry on an accessible one-story roof |
| Full roof perimeter guards | Starting at $2,400 | Multiple slide zones, longer runs, and clamp-on hardware for standing seam panels |
| Carport and RV cover rails | Starting at $1,800 | Bar-style rails over walkways on metal carports and RV covers, priced by run length |
| Two-story or steep-slope install | On estimate | Height, slope, and staging needs require an on-site look before we quote |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and fastener check with photo documentation and a written repair scope |
| Minor repair (fasteners, sealant, flashing) | Starting at $350 | Covers resealing, re-fastening, and small flashing fixes; price rises with roof height and access |
| Panel and ridge replacement | Starting at $850 | Includes matching panels, ridge cap, and labor; cost moves with panel count and profile availability |
| Widespread storm damage | On estimate | Needs an on-site look to count damaged panels, check deck and purlins, and scope the repair |
| Travel | Included | In McAllen and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic visual inspection | Free estimate | Ground-level and ladder check of edges, gutters, and visible panels, plus a verbal summary |
| Full roof walk inspection | Starting at $199 | On-roof check of every panel, fastener, seam, and flashing detail, with written report |
| Insurance documentation inspection | Starting at $299 | Photo documentation and measurements formatted for hail or wind damage claim submission |
| Complex or large-scale job | On estimate | Steep multi-story roofs with many penetrations need an on-site look before pricing |
| Travel | Included | in McAllen and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 5-inch seamless K-style gutter | Starting at $9/linear ft | Includes hangers, downspouts, and on-site roll forming for standard single-story runs. |
| 6-inch seamless K-style gutter | Starting at $12/linear ft | Higher capacity for long panel runs; price moves with roof area and downspout count. |
| Half-round seamless gutter | Starting at $14/linear ft | Traditional profile for Spanish Revival homes; cost rises with brackets and fascia prep. |
| Gutter guards | Starting at $6/linear ft | Micro-mesh or screen; price depends on debris load from mesquite and palm canopy. |
| Complex or large-scale job | On estimate | Two-story access, rotted fascia, or long commercial runs need an on-site look first. |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site walk, photos, and a written scope with panel and fastener recommendations |
| Exposed fastener agricultural roof | Starting at $3.50 per sq ft | Corrugated or ribbed panels, closures, and fasteners; span and purlin condition move the price |
| Standing seam commercial roof | Starting at $6.50 per sq ft | Concealed fasteners, insulation, and flashing; roof slope and penetration count move the price |
| Retrofit over existing roof | On estimate | Code limits on existing layers and deck condition require an on-site look first |
| Travel | Included | In McAllen and surrounding Hidalgo County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (956) 348-0421, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in McAllen need a crew that understands the Rio Grande Valley's specific demands: brutal summer sun, hurricane-season wind, spring hail, and the occasional hard freeze. McAllen Metal Roofing is your local source for Metal Roof Installation, replacement, re-roof, and repair. From the Spanish Revival and Mission-style homes near downtown to the brick and stucco two-stories in north McAllen and Sharyland, we match the system to the structure, not the other way around.
We serve McAllen, Edinburg, Mission, Harlingen, Brownsville, and the surrounding communities, including the winter-Texan RV parks and mobile-home communities, farmhouses, packing sheds, and barns scattered among the citrus groves. Our network of licensed, bonded, and insured local contractors handles steep pitches, heavy tree cover, and the large stock of aging screw-down roofs whose fasteners are backing out. Call (956) 348-0421 for straight guidance on repair versus replace.
The most common cause of a leaking metal roof in McAllen is not panel failure. It is the fastener. On 15 to 30 year old exposed-fastener roofs, the EPDM sealing washers under each screw dry, shrink, and crack from years of intense sun and thermal cycling. Once the washer fails, water enters at the fastener hole. Other frequent culprits include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a Gulf storm, and punctures from fallen mesquite or palm limbs.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, rotting sheathing and saturating insulation before you see a ceiling stain. That is why we start every Metal Roof Leak Repair with a thorough inspection to find the actual source, not just the wet spot. Many roofs that look like candidates for replacement only need a full screw replacement and re-fastening, which often restores a watertight roof for a fraction of replacement cost.
The honest repair-versus-replace call depends on panel condition, deck integrity, and how many fasteners have already failed. We tell you plainly when a targeted Metal Roof Repair is the right move and when a full replacement makes more financial sense. Call (956) 348-0421 to schedule an inspection, or contact us for a free estimate.
We install the full range of metal systems. Standing Seam Metal Roofing uses concealed clips and hidden fasteners, making it the premium choice with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, workshops, and carports. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more upfront but has no exposed fasteners to service, while screw-down costs less and needs its fasteners maintained over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that saves on tear-off and disposal. When the deck is not sound, a full tear-off and Metal Roof Replacement is the only responsible choice.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of where your project likely falls, see our pricing page. Then request a free estimate or a free roof inspection so we can give you an honest, site-specific number.
After a storm, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. We never suggest that a deductible could be waived, absorbed, or paid by the contractor.
On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can restrict panel profile and color. Requirements vary, always verify with the McAllen building or planning department before starting your project. For documentation and next steps, contact us.
Ready to get started? McAllen Metal Roofing serves in McAllen and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421
Your Free Quote Request